The Global Safety Light Curtain Market size is expected to reach $1.5 billion by 2028, rising at a market growth of 5.3% CAGR during the forecast period.
Safety light curtains are an innovative approach to protect people around various dangerous machinery. Comparing safety light curtains to more conventional guarding techniques, like mechanical barriers, sliding gates, and pull-back restraints, safety light curtains offer increased freedom, flexibility, and reduced operator fatigue.
Safety light curtains make routine procedures, like machine setup, maintenance, and repair easier by eliminating the requirement for solid protection where appropriate. A receiver unit receives an array of synchronized and parallel infrared light beams from a photoelectric transmitter. A stop signal is sent to the guarded machine by the light curtain's control circuitry when an opaque item blocks one or more rays in the sensing field.
The timing and logic circuitry of the light curtain powers the light emitting diodes (LEDs) inside the transmitter unit, which then pulses out invisible infrared light. The light pulses are modulated, or pulsed at a particular frequency, and are both sequenced and each LED is turned on one at a time. The receiving unit's supporting circuitry and corresponding phototransistors are made to only detect the precise pulse and frequency that are intended for it.
These methods provide improved safety and reject outside light sources. The reception electronics and the control logic, user controls, and diagnostic indicators can share housing or be contained in a separate enclosure. Safety light curtains have stable and reliable control. Control reliability is defined as the ability of the machine control system, the safeguarding, other control components, and related interfacing to achieve a safe state in the event of a failure within their safety-related functions in ANSI B11.19-2003, subclause 3.14, which is mandated by the Occupational Safety and Health Act (OSHA) as well as the American National Standards Institute (ANSI) for safety-related standards.
The COVID-19 pandemic had a negative impact on the market for safety light curtains. Lockdowns and travel restrictions were implemented by governments all over the world to stop the pandemic's spread. Due to these restrictions, the various manufacturing facilities producing safety light curtains were temporarily closed. A diverse supply chain is used to manufacture the safety light curtains. Manufacturers, assemblers, and distributors of components are dispersed across the globe. It exposed the supply chain to a number of external disruptions. Supply chains have been hampered by the COVID-19 pandemic, which has caused delays in manufacturing and delivery for all categories of produced goods. Despite rising demand, it has had an impact on safety light curtain production.
Manufacturing facilities can now operate around-the-clock owing to the deployment of automated machinery and technology as a result of digital manufacturing. Components, including programmable logic controllers distributed control systems, supervisory control, and data acquisition systems are used to operate and control automated machinery. The use of several contemporary technologies along with highly automated manufacturing techniques that necessitate the installation of numerous sensors, as well as components for effective operation, define this paradigm of the industrial revolution.
The single beam safety light curtains are applicable for safeguarding smaller hazard zones. For example, the safety-oriented optoelectronics system offers reliable protection for the personnel in charge, as every barrier to the light beam induces a signal, which turns off the potentially dangerous machine movement. At the same time, the working processes are not behind safety doors, but instead are transparent. With these properties, the new safety light barriers have a range of applications, for example, on workstations for assembly and handling, and in the wood, paper, and printing industries.
Due to their propensity for using semi-automatic equipment, small and medium-sized businesses (SMEs) may not be familiar with the high operational productivity of safety light curtains. Furthermore, small and medium-sized businesses (SMEs) are in fierce competition with large businesses. To gain a competitive edge, SMEs are gradually embracing Industry 4.0 because it offers optimization, flexibility, efficiency, and scalability, as well as predictive maintenance, that could enable quick responses, informed decisions, and increased business productivity.
On the basis of Safety Level Type, the Safety Light Curtain Market is bifurcated into Type 4 and Type 2. In 2021, the type 4 segment acquired the largest revenue share of the safety light curtain market. Reliable automatic cross-checking architecture, which is the foundation of Type 4 safety light curtains, enables quick failure identification. A type 4 safety light curtain's control unit is more sophisticated technology than other types of safety light curtains.
Based on Component, the Safety Light Curtain Market is segregated into Light-emitting Diodes (LED), Photoelectric Cells, Control Units & Display units, and Other Components. In 2021, the light emitting diode segment witnessed a substantial revenue share of the safety light curtain market. The rising growth of the segment is majorly attributed to the fact that LED lights are not only the most essential component of the smart light curtain but also one of the most cost-efficient.
By Resolution, the Safety Light Curtain Market is segmented into 9−24mm, 25−90mm, and More than 90mm. In 2021, the 9−24mm segment registered a significant revenue share of the safety light curtain market. The surge in the growth of this segment is primarily owing to the cost-efficiency of the safety light curtains with the 9-24mm resolution. Machines with this resolution are majorly used in small and medium-sized organizations.
On the basis of Application, the Safety Light Curtain Market is classified into Packaging, Material Handling, Robotics, Assembly, and Other Applications. In 2021, the robotics segment witnessed a significant revenue share of the safety light curtain market. The segment's growth is being fueled by the expanding use of robots across a variety of industries, including semiconductor & electronics, automotive, and food & beverage.
By Industry, the Safety Light Curtain Market is categorized into Automotive, Semiconductor & Electronics, Food & Beverage, Healthcare, and Other Industries. In 2021, the automotive segment acquired the largest revenue share of the safety light curtain market. The automotive industry is expanding as a result of the rising demand for cars caused by the world's expanding population.
| Report Attribute | Details |
|---|---|
| Market size value in 2021 | USD 1 Billion |
| Market size forecast in 2028 | USD 1.5 Billion |
| Base Year | 2021 |
| Historical Period | 2018 to 2020 |
| Forecast Period | 2022 to 2028 |
| Revenue Growth Rate | CAGR of 5.3% from 2022 to 2028 |
| Number of Pages | 229 |
| Number of Tables | 459 |
| Report coverage | Market Trends, Revenue Estimation and Forecast, Segmentation Analysis, Regional and Country Breakdown, Companies Strategic Developments, Company Profiling |
| Segments covered | Component, Industry, Resolution, Safety Level Type, Application, Region |
| Country scope | US, Canada, Mexico, Germany, UK, France, Russia, Spain, Italy, China, Japan, India, South Korea, Singapore, Malaysia, Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria |
| Growth Drivers |
|
| Restraints |
|
Region-Wise, the Safety Light Curtain Market is analyzed across North America, Europe, Asia-Pacific, and LAMEA. In 2021, Asia Pacific accounted for the biggest revenue share of the safety light curtain market. Due to the region's prominence as a manufacturing hub, key automakers and suppliers are heavily investing in the region's smart factory market, including Tata Motors in India and Hyundai Motors in South Korea. Most major businesses across a variety of industries have relocated their manufacturing facilities to the Asia Pacific as a result of the region's low operating expenses.
Free Valuable Insights: Global Safety Light Curtain Market size to reach USD 1.5 Billion by 2028
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Omron Corporation, Keyence Corporation, Sick AG, Panasonic Corporation, Schneider Electric SE, Rockwell Automation, Inc., Pepperl + Fuchs Group, Datalogic S.p.A. (Hydra S.p.A.), Banner Engineering Corporation, and Balluff GmbH.
By Application
By Industry
By Resolution
By Safety Level Type
By Component
By Geography
The Safety Light Curtain Market size is projected to reach USD 1.5 billion by 2028.
Increasing Deployment Of Digital Platforms In Manufacturing are driving the market in coming years, however, Lower Rate Of Adoption Among SMEs restraints the growth of the market.
Omron Corporation, Keyence Corporation, Sick AG, Panasonic Corporation, Schneider Electric SE, Rockwell Automation, Inc., Pepperl + Fuchs Group, Datalogic S.p.A. (Hydra S.p.A.), Banner Engineering Corporation, and Balluff GmbH.
The Packaging segment acquired maximum revenue share in the Global Safety Light Curtain Market by Application in 2021 thereby, achieving a market value of $438.1 Million by 2028.
The Control Units & Display Units segment is leading the Global Safety Light Curtain Market by Component in 2021 thereby, achieving a market value of $675.9 Million by 2028.
The Asia Pacific market dominated the Global Safety Light Curtain Market by Region in 2021, and would continue to be a dominant market till 2028; thereby, achieving a market value of $571.9 Million by 2028.
Our team of dedicated experts can provide you with attractive expansion opportunities for your business.
Unique Offerings 